Thursday, May 25, 2017

Do You Know How To Use Sonar Fish Finder?






Sonar fish finder uses transmitters to emit high-frequency signals underwater. These signals are directed toward the bottom of the body of water. If nothing is between the fish finder sonar and the background, the fish finder will display only one line representing the bottom. But when a fish is on the transmitter, it creates an echo. This echo is returned to the fish finder sensor, which interprets the echo and shows the depth of which the echo occurred, which gives it an advantage of fishing.

Instructions

#1 Install the transmitter. Generally, you will have to choose between mounting the transmitter under the boat, to a trolling motor or at the top of the inner hull and letting it fall into the water.

#2 Set the fish to find sensitivity to sound while watching the screen. When the sensitivity is too high, there will be static-like patterns on the screen. If the sensitivity is too low, neither the bottom o the body of water will appear on the screen.

#3 Determine the depth of the body of water. This is a numerical value on the screen of the fish finder's sonar system. This is important in helping you determine how many fishing lines to feed off your pole.

#4 Accustom to the representation of the water body screen. The bottom will appear as a solid, uneven line at the bottom of the screen. The water surface appears as a horizontal line filled with mixed static at the top of the fish finder's sonar display of your system.

#5 Learn to identify patterns on the screen that are brush piles if you are fishing in a lake. Brush stacks appear like stains on the bottom of the lake. Fish like bass hiding out in brush piles, so consider fishing close to those echoes.

#6 Learn how to identify the fish in the sonar fish finder system display with the fish symbols deactivated. With the symbols off, fish appear as curved lines above the bottom of the body of water. Set the sonar fish finder noise filter if there are lines on the screen that appear to be at random static.

#7 Remember that the fish display screen sonar was indicating when catching a fish. This will help you learn how to use your system to catch more fish later if you keep in mind what to look for.


Tips & Warnings

Clean your fishing gear after use to help keep it in good working order. Read the instruction manual for your fish finder sonar system. Although the general guidelines for the use of these systems are the same, there are details that vary between manufacturers and models. Use caution when handling fishing hooks and lures, which can cause injury. Even if you identify an echo as a fish properly, there is no guarantee that the fish will carry a bite on your bait.

No comments:

Post a Comment